uncontrolled copy when printed or downloaded. please refer to the 4d systems website for the latest revision of this document 3.2 display bezel 4d - bezel - 32 for the ulcd - 32 pt u display module document date: 16 th september 2013 document revision: 1.0 d atasheet
3.2 bezel for the ulcd - 32 pt u contents 1. description ................................ ................................ ................................ ............................. 3 2. features ................................ ................................ ................................ ................................ . 3 3. assembly of the ulcd - 32ptu onto the bezel and on to the panel ................................ ............. 4 4. mechanical dimensions ................................ ................................ ................................ .......... 5 5. l egal notice ................................ ................................ ................................ ............................ 6 6. contact information ................................ ................................ ................................ ............... 6
4d systems 3.2 bezel for the ulcd - 32 pt u ? 201 3 4d systems page 3 of 6 www.4dsystems.com.au 3.2 bezel for the ulcd - 32ptu 1. d escription the 4d systems 3.2 display bezel is a plastic bezel for the ulcd - 32 pt u display module. this bezel provide s a sleek cover to the ulcd - 32 pt u display module, and also providing an easy method to panel mount the display module into an enclosure. the bezel mounts the display module, wh ile also providing a mounting solution into a panel, keeping all securely together. spring clips attach to the bezel in four location s , and hold it tightly to the enclosure/wall p anel, offering a range of panel thickness from 1mm to 2.5mm without the need to add washers. if a panel thicker than 2.5mm is required, washers can be placed under the spring clip, however this is not recommended practice. please note, this bezel is only designed for indoor use. it is not weathe r tight, nor does it offer any ip rating. it should only be used indoors in clean environments as it offers litt le protection to the circuitry o f moisture or particles. bezels are available in black or white . bare 3.2 bezel - front bare 3.2 bezel - back 2. features ? plastic 3.2 bezel designed for panel mounting the ulcd - 32 pt u ? simple cut - out required, no mounting holes requires to be drilled in the panel ? brass mounting inserts in the rear of the bezel ? 4x spring clips for attaching the bezel to the panel ? 8x m2 mounting screws and washers included ? 1x bezel backing tape to attach bezel to panel (optional) ulcd - 32 pt u mounted in 3.2 bezel - back ulcd - 32 pt u mounted in 3.2 bezel - front spring clips
4d systems 3.2 bezel for the ulcd - 32 pt u ? 201 3 4d systems page 4 of 6 www.4dsystems.com.au 3.2 bezel for the ulcd - 32ptu 3. assembly of the ulcd - 32 pt u onto the bezel and o n to the panel 1) place the ulcd - 32 pt u face down into the bezel , taking care of the orientation of the display so the active area of the display is visible through the viewing hole on the front of the bezel . 2) insert 4 of the screws with 4 of the washers into the mounting tabs to secure the dis play on the bezel. nip the screws up but take care not to over tighten or damage may be done to the bezel. 3) if desired, the supplied double sided backing tape can be carefully attached to the rim of the bezel, to help seal and secure the bezel to the panel. this is optional. 4) place the assembled bezel into the panel/enclosure, taking note of the orientation of the display. 5) place a washer on one of the remaining screws, followed by a spring clip, and attach to one of the brass inserted holes on the be zel, allowing the spring clip to work against the panel, holding the bezel firmly in place. 6) repeat for the remaining screws. 7) the bezel should now be securely fitted to the panel, and the ulcd - 32 pt u should be securely fitted to the bezel. ulcd - 32 pt u secured to the 3.2 bezel, and bezel secured to the panel/enclosure using the four spring clips
4d systems 3.2 bezel for the ulcd - 32 pt u ? 201 3 4d systems page 5 of 6 www.4dsystems.com.au 3.2 bezel for the ulcd - 32 pt u 4. mechanical dimensions
4d systems 3.2 bezel for the ulcd - 32 pt u ? 201 3 4d systems page 6 of 6 www.4dsystems.com.au 3.2 bezel for the ulcd - 32 pt u ordering information order code: 4d bezel 32 packaging: module sealed in antistatic foam padded 4d systems box 5. legal notice proprietary information the information contained in this document is the property of 4d systems pty. ltd. and may be the subject of patents pending or granted, and must not be copied or disclosed with out prior written permission. 4d systems endeavours to ensure that the information in this document is correct and fairly stated but does not accept liability for any error or omission. the development of 4d systems products and services is continuous and published information may not be up to date. it is important to check t he current position with 4d systems. 4d systems reserves the right to modify, update or makes changes to specifications or written material without prior notice at any time. all trademarks belong to their respective owners and are recognised and acknowledg ed. disclaimer of warranties & limitation of liability 4d systems makes no warranty, either express ed or implied with respect to any product, and specifically disclaims all other warranties, including, without limitation, warranties for merchantability, n on - infringement and fitness for any particular purpose. information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. it is your responsibility to ensure that yo ur application meets with your specifications. images and graphics used throughout this document are for illustrative purposes only. all images and graphics used are possible to be displayed on the 4d systems range of products, however the quality may vary . in no event shall 4d systems be liable to the buyer or to any third party for any indirect, incidental, special, consequential, punitive or exemplary damages (including without limitation lost profits, lost savings, or loss of business opportunity) arisi ng out of or relating to any product or service provided or to be provided by 4d systems, or the use or inability to use the same, even if 4d systems has been advised of the possibility of such damages. 4d systems products are not fault tolerant nor design ed, manufactured or intended for use or resale as on line control equipment in hazardous environments requiring fail C safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, dire ct life support machines or weapons systems in which the failure of the product could lead directly to death, personal injury or severe physical or environmental damage (high risk activities). 4d systems and its suppliers specifically disclaim any ex pressed or implied warranty of fitness for high risk activities. use of 4d systems products and devices in 'high risk activities' and in any other application is entirely at the buyers risk, and the buyer agrees to defend, indemnify and hold harmless 4d systems from any and all damages, claims, suits, or expenses resulting from such use. no licenses are conveyed, implicitly or otherwise, under any 4d systems intellectual property rights. 6. contact information for technical support: support@4dsystems.com.au for sales support: sales@4dsystems.com.au website: www.4dsystems.com.au copyright 4d systems pty. ltd. 2000 - 201 3 .
|
